{Benchmark of power packaging for dc/dc and ac/dc converters}

Title{Benchmark of power packaging for dc/dc and ac/dc converters}
Publication TypeJournal Article
Year of Publication2002
AuthorsCheasty P, Flannery J, Meinhardt M, Alderman A, O'Mathúna SCian
JournalIEEE Transactions on Power Electronics
KeywordsBenchmarking, Packaging, power conversion
AbstractThis paper presents the first reported final results of a benchmarking project "StatPEP" which investigated the Status of Power Electronic Packaging used in commercial DC/DC and AC/DC switch mode power supplies. The methodology of the project is first described. Some of the salient results of a comprehensive benchmarking of DC/DC converters (rated power of 100 W) and AC/DC converters (rated power up to 576 W) are presented. Examples for figures-of-merit are presented. The results of the investigation are presented in a generic form, which does not identify individual products. A comparison of the performance of the units shows that the measured power density of the AC/DC units is approximately 10{%} that of the DC/DC while the thermal density based on footprint is 50{%}. Also the switching frequency of the AC/DC is 50{%} that of the DC/DC. Some of the reasons for these differences are discussed